- White Spirit 100%
- Industrial grade
- Considered to be a substitute of Mineral Turps.
White Spirit is a clear colourless liquid hydrocarbon that is widely used across a variety of different industries and is commonly referred to as a turpentine substitute. The flashpoint of white spirit is 42ºC and the boiling point is between 149-194ºC with a specific gravity of 0.78. White spirit has a good level of solvency which means that it mixes well with other solvents. It has a controlled mid-range evaporation rate and leaves no residue upon drying. White spirit is a petroleum-based solvent.
Cleaning & Household Uses:
- Cleans paint brushes and equipment. Effective for painting prep and cleaning up.
- Apply a small amount and work into stains to remove.
- Assists with cleaning up oil, grease and general dirt. Degreases and cleanses automobile and machinery part cleaning.
- Removes sticky residue. Use on a cloth and work into surfaces like carpets or clothing to remove gum or stick residues.
- Use on a cloth to remove skid marks and scratches from tiles.
Industrial & DIY Uses:
- Solvent us used as thinner for paints and varnishes.
- Can remove oil and acrylic based paints, varnishes, tar and tree sap residues.
Painting Preparation Uses:
- Used to erase some mistakes whilst painting.
- Clean paints brushes – even with heavy built up oils and paints, the turps can be used to dissolve and break down for an easy clean.
- Used to thin our or dilute the thickness of paint.
Available Sizes: 1, 5, 20, 200 and 1000 Litre.
*All information provided is a recommendation. We cannot guarantee the uses as each application has various characteristics and therefore we cannot be certain it will work for you*
- Keep out of reach of children.
- Keep away from sources of ignition - no smoking.
- Avoid contact with eyes.
- Take precautionary measures against static discharges.
- Keep container in a well-ventilated place.
- Eliminate all ignition sources. Remove leaking containers.
- Contain and absorb on suitable chemical material.
- Restrict access to area.
- Firefighters MUST wear full protective clothing and self-contained breathing apparatus.
- If Swallowed contact a doctor or poison information center immediately and show container or label.
- In case of contact with eyes rinse immediately with plenty of water and contact a doctor or poison information center.
- In case of contact with skin, wash contacted area with soap and water.
- If inhaled remove to fresh air.
- If not breathing, give artificial respiration.
- Prevent material entering sewers.
Be The First To Review This Product!
Help other Sydney Solvents users shop smarter by writing reviews for products you have purchased.