Black and White Screw in 20L Tap

Use the Black and White taps for easy flow from the drums. Plug the product in at the bottom and it use it as a tap to flow the product out. The tap is suitable to use for solvents and chemicals. 

How to install one of our black screw in taps:

Our black screw in taps can be a little tricky to install if you have never done it before so here is a quick step by step on how to install them:

1. Tip the drum on its back
2. Remove the little circular piece of plastic that is at the bottom of the drum, we recommend finding something that you can place in the little cut out as this will help you turn it.
3. Once this piece of plastic has been removed there will then be a thicker piece of plastic beneath it and you will need to pierce a hole through this. It can be quite difficult sometimes so don’t panic if you don’t get it the first time
4. Once you have pierced a whole ( which does not need to be big ) you can then screw the tap on and tip it back up your tap will work perfectly.

When you are finished using the tap suggest making sure that you have closed the tap properly to save leaking every where on you can tip it back on its side to be extra safe.

Check out our youtube video:

https://www.youtube.com/watch?v=8E-gi0rGlNU&t=2s

Good luck :)